如何使用 KeepSolid SmartDNS 设置 Huawei 路由器
更改 Huawei 路由器 DNS 设置之前
- 开始设置 Huawei 无线路由器之前,请务必记下现有的 DNS 设置。如果以后决定恢复原始设置,您将需要这些信息。
- 另外,请确保路由器已刷入最新固件。
- 要使用我们的 KeepSolid SmartDNS 应用解锁流媒体服务,您必须注册 IP 地址。点击此处,了解如何在 KeepSolid SmartDNS 应用和 KeepSolid 用户中心管理您的 IP 地址。
使用 KeepSolid SmartDNS 服务配置 Huawei 路由器
- 登录 Huawei 路由器的管理面板。
- 在左侧菜单中进入基本(Basic)设置,然后选择 LAN。
- 在 DHCP 选项卡中,在主 DNS(Primary DNS)和备用 DNS 服务器地址(Secondary DNS server address)字段中输入 KeepSolid SmartDNS 服务器地址:
62.210.136.158
172.96.164.226 - 点击保存(Save)并重启 Huawei 路由器,使 DNS 设置的更改生效。
注意:KeepSolid SmartDNS 服务根据您的 IP 地址提供访问权限,该地址需要在我们的系统中注册。如果您的 IP 地址与注册的地址不同,服务将停止运行。请通过您的用户中心或 KeepSolid SmartDNS 应用更新注册的 IP 地址,以恢复服务。
如何在 Huawei 路由器上屏蔽 Google DNS
我们建议您在 Huawei 路由器上屏蔽 Google DNS(8.8.8.8 和 8.8.4.4),因为某些设备上的部分应用默认使用 Google DNS。要不受地域限制地播放流媒体,请按照以下步骤屏蔽 Google DNS:
- 确保 Huawei 路由器已配置为使用 KeepSolid SmartDNS(请按照上述说明操作)。
- 登录路由器的管理面板,进入高级(Advanced)设置。
- 选择防火墙(Firewall)(某些路由器可能在高级选项卡下显示 IP 过滤)。
- 打开防火墙级别(Firewall Level)下拉列表,选择自定义(Custom)。将其命名为 google,然后点击提交(Submit)。
- 选择刚刚创建的名为 google 的防火墙级别,然后选择 IP 过滤(IP filtering)。
- 点击新建(New),按如下所示填写字段,然后点击提交(Submit):
规则名称(Rule name):Google 1
目标起始地址(Destination start address):8.8.8.8
目标起始端口(Destination start port):53
优先级(Priority):1
输入接口(Input interface):All
协议(Protocol):TCP/UDP
目标结束地址(Destination end address):8.8.8.8
目标结束端口(Destination end port):53
状态(Status):Reject - 使用 Google 的第二个 DNS 8.8.4.4 重复第 6 步:
规则名称(Rule name):Google 2
目标起始地址(Destination start address):8.8.4.4
目标起始端口(Destination start port):53
优先级(Priority):2
输入接口(Input interface):All
协议(Protocol):TCP/UDP
目标结束地址(Destination end address):8.8.4.4
目标结束端口(Destination end port):53
状态(Status):Reject - 完成!现在重启 Huawei 路由器以应用更改。